An IPv6 address can look unfamiliar: long groups of hexadecimal characters separated by colons, sometimes shortened with a double colon. If you need to know how to find ipv6 address information, first decide which address you actually need. Your device may have several IPv6 addresses at once, while the address visible to websites may be assigned to your router or ISP.
That difference matters when you are troubleshooting a game server, setting up remote access, checking DNS records, reviewing firewall rules, or confirming whether your internet connection supports IPv6.
Public vs. private IPv6 addresses
An IP address works like a routing address for internet traffic. IPv6 was created to expand far beyond the limited pool of IPv4 addresses. Instead of IPv4’s familiar format, such as `192.0.2.25`, IPv6 uses 128 bits and appears in a format such as `2001:db8:85a3::8a2e:370:7334`.
Unlike most home IPv4 setups, IPv6 does not typically rely on Network Address Translation, or NAT, to place many devices behind one public address. A device can receive a globally routable IPv6 address directly. That does not mean it is automatically open to the internet. Your router and device firewall should still block unsolicited inbound connections unless you create an intentional rule.
When you inspect your device, you may see three common IPv6 address types:
- A global unicast address is publicly routable. It commonly begins with `2` or `3`, though the prefix is assigned by your ISP.
- A link-local address begins with `fe80::`. It works only on the local network segment and cannot be routed across the internet.
- A unique local address, often beginning with `fd`, is used inside private networks. It is the IPv6 equivalent of a private internal address, not an internet-facing address.
You may also see temporary IPv6 addresses. Modern operating systems often generate them for outbound connections to improve privacy. They are normal, and they can change over time.
How to find IPv6 address details on your device
The fastest method depends on your operating system. Look for a global address if you need the address assigned to your device by your network. If you only need to confirm local IPv6 connectivity, a link-local address is useful too.
Windows
Open Command Prompt and enter:
`ipconfig`
Find the network adapter currently in use, such as Wi-Fi or Ethernet. Look for lines labeled IPv6 Address, Temporary IPv6 Address, and Link-local IPv6 Address. A global address is usually the one you want for general connectivity checks. The `fe80::` address is link-local and will not identify your device on the public internet.
For more detailed information, use:
`ipconfig /all`
This shows DNS servers, adapter details, and DHCP information. It can help determine whether your router or ISP is providing IPv6 configuration correctly.
macOS
Open Terminal and run:
`ifconfig`
Locate the active interface, usually `en0` for Wi-Fi or Ethernet on many Macs. Lines beginning with `inet6` show IPv6 addresses. An address containing `%en0` is generally link-local. Look for an address that does not start with `fe80` when you need a globally routable address.
You can also open System Settings, select Network, choose the active connection, and review the TCP/IP or network details. The command-line method is usually clearer when multiple addresses are present.
Linux
In a terminal, run:
`ip -6 addr show`
Find the active interface, commonly `eth0`, `enp0s3`, or `wlan0`. Linux labels addresses by scope. Look for `scope global` to find an address that can route beyond your local network. Addresses marked `scope link` are link-local.
If your system shows only a link-local address, it can communicate with nearby IPv6 devices but likely has not received usable IPv6 service from the router or ISP.
iPhone and iPad
Open Settings, select Wi-Fi, then tap the information button next to the connected network. Scroll to the IPv6 section. You may see an IPv6 address, router address, and DNS details.
For cellular data, the IPv6 address may change as you move between networks or reconnect. Mobile carriers also commonly use IPv6-only or IPv6-preferred designs with translation services for IPv4 destinations.
Android
Open Settings and select Network & internet or Connections, depending on the device. Choose Wi-Fi, select the connected network, and open network details. Some Android versions show IPv6 information directly; others provide limited visibility in the standard interface.
If the settings screen does not show it, network diagnostic apps or your router’s connected-device list may provide the address. The exact path varies by manufacturer, so Android is less consistent than Windows or Linux for this task.
Find your public IPv6 address from a browser
A device-level command shows addresses configured on that device. A browser-based public IP check answers a different question: which address does the website see when you connect?
If your connection has working IPv6 and your browser prefers it, a public IP tool can display your public IPv6 address immediately. WhatIsMyPublicIP.com can help confirm the externally visible address and provide associated IP details without requiring you to search through adapter output.
The displayed address may not exactly match the address shown in your operating system. That is not always a problem. Privacy extensions may use a temporary address, your router may advertise multiple prefixes, or your network may select IPv4 for that particular connection. Browser results show the address used for that web request, not every IPv6 address available on your device.
Check your router for the IPv6 prefix
For a home network, your router is often the best place to understand the full IPv6 setup. Sign in to the router’s local administration page and look for an Internet, WAN, IPv6, or Advanced Networking section.
Your ISP may assign the router a single IPv6 address plus a delegated network prefix, commonly a `/64` or `/56`. The prefix is the network portion shared by devices on your home network. For example, if your network receives `2001:db8:1234:5600::/56`, the router can create multiple internal IPv6 subnets from that allocation.
Router pages may also show whether IPv6 uses DHCPv6, SLAAC, Prefix Delegation, or a static configuration. These settings are useful when devices receive only `fe80::` addresses or lose IPv6 connectivity after a router change.
Do not confuse the router’s WAN IPv6 address with the prefix delegated to your network. The WAN address identifies the router interface. The delegated prefix determines the public address range available to devices behind it.
Why you may have no public IPv6 address
Not every internet service provider offers IPv6 in every location or plan. Even where service exists, an older router, disabled IPv6 setting, poorly configured mesh system, or custom DNS and firewall setup can interfere with it.
Start by checking whether the router has received an IPv6 WAN address and delegated prefix. If it has not, restart the modem and router, then check the ISP’s IPv6 support and provisioning requirements. If the router has IPv6 but your computer does not, verify that the device is set to obtain IPv6 configuration automatically.
A public IPv6 address can also change. Residential ISPs often assign prefixes dynamically, and temporary privacy addresses can rotate more frequently. Avoid treating an IPv6 address as permanent for remote access, server hosting, or allowlists unless your ISP provides a static prefix. Dynamic DNS and carefully scoped firewall rules are often better options.
Use the right IPv6 address for the task
For a local printer, NAS, or device-to-device test, a link-local address may be enough. It often requires an interface identifier, such as `%en0` or `%12`, because the same `fe80::` range can exist on several interfaces.
For remote access, game hosting, or an externally reachable service, use a global IPv6 address and verify the firewall on both the device and router. For ISP ownership or allocation research, use the public address visible to an outside service and check its WHOIS information. For a connection problem, compare the router’s IPv6 status, the device’s global address, DNS configuration, and a ping or traceroute result.
Knowing which IPv6 address you are looking at prevents a common mistake: trying to use a local-only `fe80::` address as though it were reachable from the internet. Start with the task, identify the address scope, and then test the path from the same place your traffic will originate.
