Your public IP address is the address websites, game servers, remote-access tools, and other internet services see when your connection reaches them. If you need to get around an IP-based block, troubleshoot a routing issue, improve privacy, or replace an address that has been targeted by unwanted traffic, you may be looking for how to change public IP address options that actually work.
The right method depends on how your internet provider assigns addresses. Some connections receive a dynamic public IPv4 address that can change automatically. Others use a static address that remains assigned until the ISP changes it. Before changing anything, check your current public IP in a browser and write it down. That gives you a clear before-and-after result.
Public IP address versus private IP address
A public IP address identifies your internet connection on the wider internet. Think of it as the street address for your home, office, or mobile connection. Your ISP assigns it to the modem, gateway, or router facing the internet.
A private IP address, such as 192.168.1.25 or 10.0.0.14, identifies a device only inside your local network. Restarting a laptop, renewing its Wi-Fi lease, or manually changing its private address does not normally change your public IP address.
This distinction matters when you are setting up port forwarding, hosting a game server, connecting to a home computer remotely, or diagnosing a blocked connection. Those services rely on the address visible outside your network, not the address shown in your device’s Wi-Fi settings.
How to change public IP address with your home connection
For most home users, the first option is to disconnect the modem or router from the internet long enough for the ISP’s DHCP lease to expire. DHCP is the system many providers use to assign dynamic addresses. Once the old lease is released, the provider may issue a different public IPv4 address when the connection returns.
1. Restart the modem or gateway
Unplug the power from your modem or combined modem-router gateway. Leave it disconnected for at least 10 to 15 minutes, then reconnect it and wait for the internet status light to return to normal. Check your public IP again.
This works only when your ISP has another dynamic address available and decides not to return the same one. A quick restart of 30 seconds often changes nothing because the ISP still recognizes the device and its existing DHCP lease.
If you use a separate modem and router, restart the modem first. Wait until it has fully connected to the ISP, then restart the router. This sequence prevents the router from trying to use an internet connection before the modem is ready.
2. Leave the modem disconnected longer
Some ISPs retain a DHCP lease for hours or days. If a short power cycle does not produce a new address, leave the modem disconnected for several hours or overnight. The exact timing varies by provider, network configuration, and service type.
This method is inconvenient if you work from home or have security cameras, smart devices, or servers that need constant access. It is also not guaranteed. An ISP can reassign the same address even after the lease expires.
3. Change the router WAN MAC address
Many cable and fiber providers associate a public IP lease with the MAC address of the device connected to their network. On a separate router, the relevant value is usually labeled WAN MAC address, Internet MAC address, or MAC clone.
If your router supports it, you can clone a different MAC address or use its generated MAC option, then reboot the modem and router. The ISP may treat the router as a new device and issue another dynamic IP address.
Use this carefully. Do not duplicate the MAC address of an active device on the same network. Also, some ISPs ignore MAC changes, while others require a modem reboot before recognizing the new address.
4. Ask your ISP for a new address
Contacting the ISP is the most reliable method when you need the actual address assigned to your connection changed. Explain the reason clearly, such as repeated attacks, a compromised address, an incorrect reputation listing, or a business requirement.
Residential support teams may not be able to change an address on demand, especially when the service uses dynamic assignment. Business accounts with static IP service can often request a reassignment, although there may be a fee or a service interruption.
If your address is static, power cycling equipment will not change it. Static IPs are specifically intended to remain consistent for server hosting, VPN endpoints, remote access, and DNS records.
Use another network when you need a different IP now
Sometimes you do not need to change the home connection’s assigned address. You only need a different public-facing address for a particular device or task.
5. Switch to mobile data or another Wi-Fi network
Turning off Wi-Fi and using your phone’s cellular connection changes the public IP used by that phone. Tethering a computer through a mobile hotspot usually changes the computer’s visible public IP as well.
A coffee shop, workplace, friend’s home, or secondary broadband connection also presents a different public address. This is useful for testing whether a problem is tied to your home ISP, a particular network route, or an IP-based access rule.
Be aware that cellular providers commonly use carrier-grade NAT, often called CGNAT. Your phone may share one public IPv4 address with many customers. That is fine for web browsing and testing, but it usually prevents inbound port forwarding and direct hosting.
6. Use a VPN for a different visible address
A virtual private network routes your traffic through a VPN provider’s server. Websites see the VPN server’s public IP address rather than the address assigned by your ISP. This is the fastest option for changing the IP presented to websites, streaming services, and remote systems.
A VPN does not necessarily change your ISP-assigned public IP. Your router still has the original address, and your ISP can still see that you are connected to a VPN service. It changes the public address used by the traffic traveling through the encrypted VPN tunnel.
VPNs have trade-offs. They can add latency, reduce speed, and create compatibility problems with gaming, banking, work applications, or services that block known VPN ranges. Choose a reputable provider, review its privacy practices, and test your connection after enabling it.
Verify that the address actually changed
After using any method, check your public IPv4 address again from the same device and compare it with the value you recorded earlier. WhatIsMyPublicIP.com can also display the location associated with the address, which is useful for confirming that a VPN endpoint or alternate network is being used.
Do not rely only on a router’s status page. A router may show a WAN address that is private, such as 100.64.x.x or 10.x.x.x, when the ISP uses CGNAT. In that situation, the address shown by an external IP-check service is the public address websites actually receive.
If you use IPv6, check that separately. Your connection can have both IPv4 and IPv6 addresses, and changing one does not guarantee that the other has changed. A site may prefer IPv6 when it is available, which can make it appear that an IP change did not work.
Consider what will break after an IP change
Changing a public IP can interrupt services configured around the old address. Remote desktop connections, security camera access, game servers, NAS devices, allowlists, and DNS records may all need updating. If you use port forwarding, confirm that the router still has the correct rules and that the new address is reachable from outside the network.
For remote access that must remain dependable, a dynamic DNS service or a business static IP is often a better long-term answer than repeatedly trying to force a new dynamic address. For a one-time test, switching networks or using a VPN may be more practical.
A new public IP is a troubleshooting tool, not a cure-all. If a connection is slow, unstable, or blocked, test the new address, run a speed test, and use ping or traceroute results to identify whether the problem is your local network, ISP, destination service, or route between them.
